ProductsClient Access

Polymers
Elvaloy ® RET de DuPont
  • Reactive elastomeric terpolymer 
  • Delivers an improved long-term asphalt performance:
    • More resistant to high temperatures due to its resilience
    • The impact on the asphalt is absorbed and helps to prevent the rutting, the fatigue and the cracking caused for the traffic
    • Elvaloy RET reacts chemically to the asphalt so there is no separation during transport
    • In fact when the Elvaloy joins the asphalt they will remain as an integral part, so it can be also stored
  • The elvaloy is easy to use:
    • There is less equipment to modify
    • Is compact
    • Easy to clean
  • All the asphalts that are modified with elvaloy ret accomplish or even exceed the SHPR specifications
  • As an elastomer, works well with the type asphalts I.
Surfaflex
  • Is used as an additive in bitumen emulsions, it is also utilize as an asphalt modifier
  • Polymer in aqueous dispersion
Surfaflex C-1800
  • Elastomeric modifier latex type, for the manufacture of modified emulsions.
  • Improvement important properties such as elastic recovery, adhesiveness and thermal sensitivity among others.
Surfaflex HM
  • Latex systems to modify asphalt with a hot mix
  • Due to its liquid consistency it has some advantages over others polymers
  • Easy addition in line
Cellulose Fiber
VIATOP PREMIUM® de J. Rettenmaier & Söhne
  • The best solution for high demands:
    • Increasing traffic volume
    • Increased axle load
    • More driving comfort
    • Using clean technology
  • Cellulose fiber coated with asphalt and pelleted
  • The pellets were rapidly and completely disperse, this permits shorter mixing cycles and greater production capacity
  • For safer and more comfortable asphalt pavements
  • It provides elasticity, adhesion and greater resistance to surface treatments such as irrigation and irrigation seal league for special asphalt mixes
Cationic emulsifiers
Súrfax C-25
  • Cationic emulsifier for the production of medium and slow breaking emulsions.
Súrfax C-26
  • Cationic emulsifier for the production of medium and slow breaking emulsions.
Súrfax C-280
  • Medium emulsifying with good adhesion properties
  • Recommended for crushed and dirty river materials
  • Used for recycled, partial restorations
  • Sand equivalent of less than 50%. 
Súrfax C-31H
  • Low-dose
  • High stability emulsifier
  • Great covering
  • Recommended for restorations and slurry seal
  • Producing black mixtures
Súrfax C-35
  • Slow emulsifier, high stability depending on dosage, for dirty materials and warm climates
  • Liquid product, easy to use.
Súrfax QS-40B
Tambor metálico de 165Kg
  • Emulsificante superestable.
  • Cumple con la prueba del cemento.
  • Para morteros de fraguado rápido con materiales deficientes en granulometría.
  • Contamos con todo el equipo recomendado por la ISSA para el diseño de estas mezclas.
Súrfax QS-48
Tambor metálico de 165Kg
  • Emulsificante para micro carpetas en frío.
  • Permite tiempos de apertura al tráfico de menos de una hora con cohesiones de 20 kg/cm.
  • Se puede utilizar en sistemas con polímeros.
  • Contamos con todo el equipo recomendado por la ISSA para el diseño de estas mezclas.
Catalizadores
Ácido Polifosfórico
Ácido polifosfórico en presentación bidón (plástico) de 38.1021 Kg.
  • Excelente catalizador.
  • Fácil manejo y aplicación.
  • No solidifica.
Ácido Polifosfórico
Ácido polifosfórico en presentación bidón (plástico) de 38.1021 Kg.
  • Excelente catalizador.
  • Fácil manejo y aplicación.
  • No solidifica.
Asphalt modifier additives
Adisurf 80 y 80G
  • Asphalt modifying additive, useful for use in rubberized, irrigation and polymerized asphalts
  • Restore asphalt properties.
  • Is not a solvent. 
TB-1
  • ​Warm mix additive
  • Reduce the emission of greenhouse gases, such as CO2
  • Reduce fuel consumptio.
  • Offer bigger resistance to rutting
  • increase adhesion between asphalt and aggregate, adhesive additives.
Anionic emulsifiers
Súrfax A-10
  • Super stable emulsifier
  • Recommended for constructions impermeability
  • Recommended for anionic slurry seal 
Súrfax A-15
  • Specially modified natural resin.
  • Excellent properties to the formulation of slow breaking, medium anionic emulsions
Aditivos promotores de adherencia
AS100
  • Permite producir mezclas negras y brillantes con agregados tipo SASCAB.
  • Especial para agregados 100% calcáreos.
AS300
  • Permite producir mezclas negras y brillantes con agregados tipo SASCAB.
  • Especial para agregados 100% calcáreos.
Súrfax F-50
  • Aditivo para rebajados.
  • Mejora la adherencia al agregado.
  • Permite trabajar con agregados húmedos mejorando el cubrimiento de los mismos.
  • Ofrece un fácil manejo de las mezclas.
Aditivos modificadores de Asfalto
Súrfax RF1
  • Aditivo rejuvenecedor de asfaltos para trabajos de recilcado en frío con emulsiones, para pavimentos muy oxidados y fragilizados.
  • Este producto se incorpora en la solución jabonosa.
Surfapen
  • Aditivo incorporable a la solución jabonosa para la producción de emulsiones para riegos de penetración.
  • Eleva la penetración del asfalto.
  • No es un solvente.
Adhesive additives
AS500
  • Hot mix additive
  • Dilute cold additive
AS800
  • Hot mix additive
  • Recommended for very particular cases.
Súrfax F50
  • Dilute additive
  • Improve adherence to the aggregate.
  • It allows working with wet aggregates, improving surfaces adhesion and coverage
  • it offers easy handling of mixtures
AS600
C1800
C1814
CRAV
CRV
ELVAX240
ELVAX460
SFXC
SFXHM
TB2
VIATOP PREMIUM
To know more about our products, please register your user name and password. If you still don't have a user name, register by clicking on the link below.

Username:
Password:

New User
Forgot my password